RC-900

RC-900 Remote Control for the SEC-1245E, SEC-1260E, SEC-1280E, SEC-2425E, & SEC-2440E battery chargers. RC-900 Remote Control comes with 10 metres of flat ribbon cable, which has 8 position modular male connectors at each end. The Remote Panel can be used to switch on / switch off the charger and also monitor the charging status of the charger from a remote location.

Explore this product
  • Input Voltage n/a
  • Output Voltage n/a
  • Dimensions 21 x 64 x 108 mm
  • Weight 0,07 Kgs
  • Output n/a

SEC-1245E

This advanced fully automatic three stage 45 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 230 V, 50 Hz AC source. A DIP switch setting can be used to convert to a two stage algorithm, in order to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short circuit and reverse polarity and thermal overload protection. The unit allows charging of up to 2 separate battery banks.

Explore this product
  • Input Voltage 210-250 VAC
  • Output Voltage 14,8-14,4 VDC
  • Dimensions 305 x 230 x 108 mm
  • Weight 5 Kgs
  • Output 45 Amps

SEC-1260E

This advanced fully automatic three stage 60 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 230 V, 50 Hz AC source. A DIP switch setting can be used to convert to a two stage algorithm, in order to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short circuit and reverse polarity and thermal overload protection. The unit allows charging of up to 2 separate battery banks.

Explore this product
  • Input Voltage 210-250 VAC
  • Output Voltage 14,8-14,4 VDC
  • Dimensions 330 x 230 x 108 mm
  • Weight 5 Kgs
  • Output 60 Amps

SEC-1280E

This advanced fully automatic three stage 80 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 230 V, 50 Hz AC source. A DIP switch setting can be used to convert to a two stage algorithm, in order to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short circuit and reverse polarity and thermal overload protection. The unit allows charging of up to 2 separate battery banks.

Explore this product
  • Input Voltage 210-250 VAC
  • Output Voltage 14,8-14,4 VDC
  • Dimensions 382 x 230 x 108 mm
  • Weight 6,05 Kgs
  • Output 80 Amps

SEC-2415E

This advanced fully automatic three stage 15 Amp battery charger is ideal for charging all types of 24 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 230 V, 50 Hz AC source. A DIP switch setting can be used to convert to a two stage algorithm, in order to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short circuit and over temperature protection. The unit allows charging of up to 3 separate battery banks.

Explore this product
  • Input Voltage 210-260 VAC
  • Output Voltage 29,6-28,8 VDC
  • Dimensions 273 x 214 x 82 mm
  • Weight 2,9 Kgs
  • Output 15 Amps

SEC-2425E

This advanced fully automatic three stage 25 Amp battery charger is ideal for charging all types of 24 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 230 V, 50 Hz AC source. A DIP switch setting can be used to convert to a two stage algorithm, in order to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short circuit, reverse polarity and thermal overload protection. The unit allows charging of up to 2 separate battery banks.

Explore this product
  • Input Voltage 210-250 VAC
  • Output Voltage 29,6-28,8 VDC
  • Dimensions 305 x 230 x 108 mm
  • Weight 5,1 Kgs
  • Output 25 Amps

SEC-2440E

This advanced fully automatic three stage 40 Amp battery charger is ideal for charging all types of 24 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 230 V, 50 Hz AC source. A DIP switch setting can be used to convert to a two stage algorithm, in order to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short circuit, reverse polarity and thermal overload protection. The unit allows charging of up to 2 separate battery banks.

Explore this product
  • Input Voltage 210-250 VAC
  • Output Voltage 29,6-28,8 VDC
  • Dimensions 330 x 230 x 108 mm
  • Weight 5,1 Kgs
  • Output 40 Amps
Return to Battery Chargers
Contact us